IP路由命令：displayospfv3interface
发布时间：2010/5/28 11:20:53 来源：城市学习网 编辑：ziteng
display ospfv3 interface
【命令】
display ospfv3 interface [ interface-type interface-number ]
【视图】
所有视图
【参数】
interface-type interface-number：接口类型和接口号。
【描述】
display ospfv3 interface命令用来查看OSPFv3的接口信息。
【举例】
# 显示GigabitEthernet1/0/0接口的OSPFv3信息。
<Quidway> display ospfv3 interface gigabitethernet 1/0/0
GigabitEthernet1/0/0 is up, line protocol is up
Interface ID 518
IPv6 Prefixes
FE80::1441:0:E213:1 (Link-Local Address)
2000:1::1
OSPFv3 Process (1), Area 0.0.0.1, Instance ID 0
Router ID 2.2.2.2, Network Type POINTOPOINT, Cost: 1562
Transmit Delay is 1 sec, State Point-To-Point, Priority 1
No designated router on this link
No backup designated router on this link
Timer interval configured, Hello 10, Dead 40, Wait 40, Retransmit 5
Hello due in 00:00:02
Neighbor Count is 1, Adjacent neighbor count is 1
